Description： 请选择 RT 11 RUNRIGHT TENSIONER, STANDARD RT 15 RUNRIGHT TENSIONER, STANDARD RT 18 RUNRIGHT TENSIONER, STANDARD RT 27 RUNRIGHT TENSIONER, STANDARD RT 38 RUNRIGHT TENSIONER, STANDARD RT 45 RUNRIGHT TENSIONER, STANDARD RT 50 RUNRIGHT TENSIONER, STANDARD RT H15 TENSIONER, HIGH TEMP RT H18 TENSIONER, HIGH TEMP RT H27 TENSIONER, HIGH TEMP RT H38 TENSIONER, HIGH TEMP RT H45 TENSIONER, HIGH TEMP RT H50 TENSIONER, HIGH TEMP RT N11 TENSIONER W/NEOPRENE, OIL RESISTANT RT N15 TENSIONER W/NEOPRENE, OIL RESISTANT RT N18 TENSIONER W/NEOPRENE, OIL RESISTANT RT N27 TENSIONER W/NEOPRENE, OIL RESISTANT RT N38 TENSIONER W/NEOPRENE, OIL RESISTANT RT N45 TENSIONER W/NEOPRENE, OIL RESISTANT

Type： 请选择 Chain/Belt Tensioner

ElementMaterial： 请选择 Heat Resistant Rubber Natural Rubber Neoprene

Style： 请选择 Elastomeric

Color： 请选择 Black Metallic

UPCNumber： 请选择 17451 17452 17453 17454 17455 17456 17490 17491 17492 17493 25597 26709 53285 53287 53289 53291 53341 57517 57519

Tensioner： 请选择 RT H15 RT H18 RT H27 RT H38 RT H45 RT H50 RT N11 RT N15 RT N18 RT N27 RT N38 RT N45 RT11 RT15 RT18 RT27 RT38 RT45 RT50

MountingBoltSize： 请选择 M10 x 30 M12 x 40 M16 x 40 M20 x 50 M24 x 60 M6 x 20 M8 x 25

OutsideDiameterDimD： 请选择 1.38 in 1.77 in 2.28 in 3.07 in 3.74 in 4.53 in 5.120 in

OverallLengthDimE： 请选择 115 mm 7.87 in 130 mm 8.270 in 35 mm 2.01 in 45 mm 2.52 in 58 mm 3.11 in 78 mm 4.25 in 95 mm 5.51 in

IdlerBoltSize： 请选择 1/2 - 13 x 2 1/2 - 13 x 2-1/2 1/2 - 13 x 3-1/2 3/4 - 10 x 5 3/4 - 10 x 6 3/8 - 16 x 2

DimensionL： 请选择 112.5 mm 4.43 in 115 mm 4.53 in 155 mm 6.1 in 205 mm 8.07 in 260 mm 10.24 in 290 mm 11.42 in 90 mm 3.54 in

DimensionJ-1： 请选择 100 mm 3.94 in 130 mm 5.12 in 175 mm 6.89 in 225 mm 8.86 in 250 mm 9.84 in 80 mm 3.15 in

DimensionJ-2： 请选择 100 mm 3.94 in 140 mm 5.51 in 180 mm 7.09 in 200 mm 7.87 in 60 mm 2.36 in 80 mm 3.15 in

DimensionL1： 请选择 20 mm 25 mm 30 mm 40 mm 50 mm 60 mm

DimensionG： 请选择 10 mm 0.39 in 12 mm 0.47 in 20 mm 0.79 in 5 mm 0.2 in 7 mm 0.24 in 8 mm 0.31 in

DimensionO： 请选择 10.5 mm 0.41 in 15 mm 0.59 in 18 mm 0.71 in 20 mm 0.79 in 6 mm 0.24 in 8 mm 0.31 in

DimensionP： 请选择 10.5 mm 0.41 in 12.5 mm 0.49 in 17 mm 0.67 in 8 mm 0.31 in 8.5 mm 0.33 in

DimensionK： 请选择 20 mm 0.79 in 25 mm 0.98 in 30 mm 1.18 in 50 mm 1.97 in 60 mm 2.36 in 70 mm 2.76 in 80 mm 3.15 in

Cubicinches： 请选择 166.30172 in3 19.75957 in3 32.12132 in3 365.06726 in3 483.55021 in3 79.58975 in3 9.81925 in3

NormalTemperatureRange： 请选择 -30 to 90 oC -40 to 80 oC 80 to 120 oC

MountingBoltTorque： 请选择 10 N·m 89 in·lb 210 N·m 1859 in·lb 25 N·m 221 in·lb 410 N·m 3629 in·lb 49 N·m 434 in·lb 750 N·m 6638 in·lb 86 N·m 761 in·lb

Forceat20AngleofPretensionNormalForceLevelDimensionF： 请选择 - 1300 N 292.5 lb 180 N 40.5 lb 2150 N 483.3 lb 380 N 85.4 lb 40 N 9 lb 65 N 14.6 lb 730 N 164.1 lb

Distanceat20AngleofPretensionNormalForceLevelDimensionS： 请选择 28 mm 1.1 in 34 mm 1.3 in 44 mm 1.7 in 60 mm 2.4 in 78 mm 3.1 in 86 mm 3.4 in

Notes： 请选择 <ul><li> The recommended angle of pretension is 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.</li><li>Mounting accessories into the “Hard” Position results in approximately 25% higher tensioning force over the “normal” position.</li><li>Inch (imperial) standard tensioner units all come with both the mounting screw and a zinc-plated idler bolt with nuts.</li></ul>