Description： 请选择 RT F15 FRONT MOUNT TENSIONER RT F18 FRONT MOUNT TENSIONER RT F27 FRONT MOUNT TENSIONER RT F38 FRONT MOUNT TENSIONER RT F45 FRONT MOUNT TENSIONER RT F50 FRONT MOUNT TENSIONER

Type： 请选择 Chain/Belt Tensioner

ElementMaterial： 请选择 Natural Rubber

Style： 请选择 Elastomeric

Color： 请选择 Black

UPCNumber： 请选择 53273 53275 53277 53279 53281 53283

Tensioner： 请选择 RT F15 RT F18 RT F27 RT F38 RT F45 RT F50

MountingBoltSize： 请选择 M10 M12 M20 M6 M8

OutsideDiameterDimD： 请选择 115 mm 4.53 in 130 mm 5.120 in 45 mm 1.77 in 58 mm 2.28 in 78 mm 3.07 in 95 mm 3.74 in

OverallLengthDimE： 请选择 108 mm 4.25 in 140 mm 5.51 in 200 mm 7.87 in 210 mm 8.270 in 64 mm 2.52 in 79 mm 3.11 in

IdlerBoltSize： 请选择 1/2 - 13 x 2 1/2 - 13 x 2-1/2 1/2 - 13 x 3-1/2 3/4 - 10 x 5 3/4 - 10 x 6

DimensionL： 请选择 112.5 mm 4.43 in 115 mm 4.53 in 155 mm 6.1 in 205 mm 8.07 in 260 mm 10.24 in 290 mm 11.42 in

DimensionJ-1： 请选择 100 mm 3.94 in 130 mm 5.12 in 175 mm 6.89 in 225 mm 8.86 in 250 mm 9.84 in

DimensionJ-2： 请选择 100 mm 3.94 in 140 mm 5.51 in 180 mm 7.09 in 200 mm 7.87 in 80 mm 3.15 in

DimensionM： 请选择 12 mm 0.47 in 16 mm 0.63 in 17 mm 0.67 in 18 mm 0.71 in 23 mm 0.9 in 32 mm 1.26 in

DimensionR： 请选择 10 mm 0.39 in 11 mm 0.43 in 15 mm 0.59 in 17 mm 0.67 in 24 mm 0.94 in 27 mm 1.06 in

DimensionG： 请选择 10 mm 0.39 in 12 mm 0.47 in 20 mm 0.79 in 5 mm 0.2 in 7 mm 0.24 in 8 mm 0.31 in

DimensionO： 请选择 10.5 mm 0.41 in 15 mm 0.59 in 18 mm 0.71 in 20 mm 0.79 in 8 mm 0.31 in

DimensionP： 请选择 10.5 mm 0.41 in 12.5 mm 0.49 in 17 mm 0.67 in 8.5 mm 0.33 in

DimensionK： 请选择 25 mm 0.98 in 30 mm 1.18 in 50 mm 1.97 in 60 mm 2.36 in 70 mm 2.76 in 80 mm 3.15 in

Cubicinches： 请选择 166.30172 in3 19.75957 in3 32.12132 in3 365.06726 in3 483.55021 in3 79.58975 in3

NormalTemperatureRange： 请选择 -40 to 80 oC

Forceat20AngleofPretensionNormalForceLevelDimensionF： 请选择 1300 N 292.5 lb 180 N 40.5 lb 2150 N 483.3 lb 380 N 85.4 lb 65 N 14.6 lb 730 N 164.1 lb

Distanceat20AngleofPretensionNormalForceLevelDimensionS： 请选择 34 mm 1.3 in 44 mm 1.7 in 60 mm 2.4 in 78 mm 3.1 in 86 mm 3.4 in

Notes： 请选择 <ul><li> The recommended angle of pretension is 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.</li><li>Mounting accessories into the “Hard” Position results in approximately 25% higher tensioning force over the “normal” position.</li><li>Inch (imperial) standard tensioner units all come with both the mounting screw and a zinc-plated idler bolt with nuts.</li></ul>