Description： 请选择 RT SS11 RUNRIGHT METRIC TENSIONER RT SS15 RUNRIGHT METRIC TENSIONER RT SS18 RUNRIGHT METRIC TENSIONER RT SS27 RUNRIGHT METRIC TENSIONER RT SS40 RUNRIGHT METRIC TENSIONER

Type： 请选择 Chain/Belt Tensioner

ElementMaterial： 请选择 Natural Rubber

Style： 请选择 Elastomeric

Color： 请选择 Black

UPCNumber： 请选择 63014 63015 63016 63017 85681

Tensioner： 请选择 RT SS11-M RT SS15-M RT SS18-M RT SS27-M RT SS40-M

MountingBoltSize： 请选择 M10 x 30 M12 x 40 M16 x 40 M6 x 20 M8 x 25

OutsideDiameterDimD： 请选择 100 mm 3.94 in 35 mm 1.38 in 45 mm 1.77 in 58 mm 2.28 in 78 mm 3.07 in

OverallLengthDimE： 请选择 108 mm 4.25 in 140 mm 5.51 in 51 mm 2.01 in 64 mm 2.52 in 79 mm 3.11 in

DimensionT： 请选择 10.5 mm 12.5 mm 20.5 mm 8.5 mm

DimensionL： 请选择 112.5 mm 4.43 in 115 mm 4.53 in 155 mm 6.1 in 205 mm 8.07 in 90 mm 3.54 in

DimensionJ-1： 请选择 100 mm 3.94 in 130 mm 5.12 in 175 mm 6.89 in 80 mm 3.15 in

DimensionJ-2： 请选择 100 mm 3.94 in 140 mm 5.51 in 60 mm 2.36 in 80 mm 3.15 in

DimensionM： 请选择 20 mm 25 mm 30 mm 50 mm 70 mm

DimensionG： 请选择 10 mm 0.39 in 5 mm 0.2 in 7 mm 0.24 in 8 mm 0.31 in

DimensionO： 请选择 10.5 mm 0.41 in 15 mm 0.59 in 6 mm 0.24 in 8 mm 0.31 in

DimensionP： 请选择 10.5 mm 0.41 in 12.5 mm 0.49 in 8 mm 0.31 in 8.5 mm 0.33 in

DimensionK： 请选择 20 mm 0.79 in 25 mm 0.98 in 30 mm 1.18 in 50 mm 1.97 in 60 mm 2.36 in

NormalTemperatureRange： 请选择 -40 to 80 oF

MountingBoltTorque： 请选择 10 N·m 89 in·lb 210 N·m 1859 in·lb 25 N·m 221 in·lb 49 N·m 434 in·lb 86 N·m 761 in·lb

Forceat20AngleofPretensionNormalForceLevelDimensionF： 请选择 180 N 40.5 lb 380 N 85.4 lb 40 N 9 lb 65 N 14.6 lb 730 N 164.1 lb

Distanceat20AngleofPretensionNormalForceLevelDimensionS： 请选择 28 mm 1.1 in 34 mm 1.3 in 44 mm 1.7 in 60 mm 2.4 in

Notes： 请选择 <ul><li> The recommended angle of pretension is 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.</li><li>Mounting accessories into the “Hard” Position results in approximately 25% higher tensioning force over the “normal” position.</li><li>Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets).</li></ul>