Description： 请选择 RT F15-M METRIC FRONT MOUNT TENSIONER RT F18-M METRIC FRONT MOUNT TENSIONER RT F27-M METRIC FRONT MOUNT TENSIONER RT F38-M METRIC FRONT MOUNT TENSIONER RT F45-M METRIC FRONT MOUNT TENSIONER RT F50-M METRIC FRONT MOUNT TENSIONER

Type： 请选择 Chain/Belt Tensioner

ElementMaterial： 请选择 Natural Rubber

Style： 请选择 Elastomeric

Color： 请选择 Black

UPCNumber： 请选择 85026 85027 85028 85029 85030 85031

Tensioner： 请选择 RT F15-M RT F18-M RT F27-M RT F38-M RT F45-M RT F50-M

MountingBoltSize： 请选择 M10 M12 M16 M20 M6 M8

OutsideDiameterDimD： 请选择 115 mm 4.53 in 130 mm 5.120 in 45 mm 1.77 in 58 mm 2.28 in 78 mm 3.07 in 95 mm 3.74 in

OverallLengthDimE： 请选择 108 mm 4.25 in 140 mm 5.51 in 200 mm 7.87 in 210 mm 8.270 in 64 mm 2.52 in 79 mm 3.11 in

DimensionT： 请选择 10.5 mm 12.5 mm 20.5 mm

DimensionL： 请选择 112.5 mm 4.43 in 115 mm 4.53 in 155 mm 6.1 in 205 mm 8.07 in 260 mm 10.24 in 290 mm 11.42 in

DimensionJ-1： 请选择 100 mm 3.94 in 130 mm 5.12 in 175 mm 6.89 in 225 mm 8.86 in 250 mm 9.84 in

DimensionJ-2： 请选择 100 mm 3.94 in 140 mm 5.51 in 180 mm 7.09 in 200 mm 7.87 in 80 mm 3.15 in

DimensionM： 请选择 12 mm 16 mm 17 mm 18 mm 23 mm 32 mm

DimensionR： 请选择 10 mm 11 mm 15 mm 17 mm 24 mm 27 mm

DimensionG： 请选择 10 mm 0.39 in 12 mm 0.47 in 20 mm 0.79 in 5 mm 0.2 in 7 mm 0.24 in 8 mm 0.31 in

DimensionO： 请选择 10.5 mm 0.41 in 15 mm 0.59 in 18 mm 0.71 in 20 mm 0.79 in 8 mm 0.31 in

DimensionP： 请选择 10.5 mm 0.41 in 12.5 mm 0.49 in 17 mm 0.67 in 8.5 mm 0.33 in

DimensionK： 请选择 25 mm 0.98 in 30 mm 1.18 in 50 mm 1.97 in 60 mm 2.36 in 70 mm 2.76 in 80 mm 3.15 in

NormalTemperatureRange： 请选择 -40 to 80 oF

MountingBoltTorque： 请选择 210 N·m 1859 in·lb 25 N·m 221 in·lb 410 N·m 3629 in·lb 49 N·m 434 in·lb 750 N·m 6638 in·lb 86 N·m 761 in·lb

Forceat20AngleofPretensionNormalForceLevelDimensionF： 请选择 1300 N 292.5 lb 180 N 40.5 lb 2150 N 483.3 lb 380 N 85.4 lb 65 N 14.6 lb 730 N 164.1 lb

Distanceat20AngleofPretensionNormalForceLevelDimensionS： 请选择 34 mm 1.3 in 44 mm 1.7 in 60 mm 2.4 in 78 mm 3.1 in 86 mm 3.4 in

Notes： 请选择 <ul><li> The recommended angle of pretension is 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.</li><li>Mounting accessories into the “Hard” Position results in approximately 25% higher tensioning force over the “normal” position.</li><li>Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets).</li></ul>