品牌型号 - 中轴网

68514467252
新型号：
旧型号：
所属类型：GS Series Elastomeric Spiders
品牌：TIMKEN轴承
重量：kg

相关供应商

产品参数

产品型录

产品介绍

Specifications
Description	GS 24 SPIDER 92A YELLOW
Type	Jaw
SpiderType	92 Shore A
Material	Urethane
Style	Solid Center Type
Color	Yellow
Weight	0.04 lb
Dimensional Data
StockSizes	14 - 55
SpiderSize	24
SpiderOutsideDiameterDimensionA	2.160 in
SpiderThicknessDimensionW	13.97 mm 0.550 in
Cubicinches	2.56608 in3
Dimensional Data of Related Coupling
SetScrewSize	10-24
SetScrewStyleCouplingLocationSizeDimensionSL	9.91 mm 0.390 in
LengththruBore	29.97 mm 1.180 in
DimensionHD	55.12 mm 2.170 in
Min.BoreDimensionsID1/ID2	Solid
Max.BoreDimensionsID1/ID2	32.00 mm 1.25 in
DimensionCL	2.03 mm .08 in
ClampingBoltStyleCouplingBoltLocationSizeDimensionSL1	0.550 in
DimensionTH	3.05 mm 0.120 in
ClampingBoltStyleCouplingBoltSize	M6
Performance Data
Temperature	-40 to 194 oF
Max.TemperatureRange	-50 to 248 oF
NominalTorque	309.80 in·lb
Max.Torque	619.50 in·lb
Max.SpeedforClampingStyleHub	6950.00 rpm
Max.SpeedforSetScrewStyleHub	8850.00 rpm
Performance Data of Related Coupling
Max.SpeedforLockingDeviceStyleHub	13800.00 rpm
AxialMisalignment	+0.055 -0.019 in
AngularMisalignment	9.00 o
RadialMisalignment	0.005 in
DynamicTorsionalStiffness	38019.00 in·lb/rad
StaticTorsionalStiffness	12673.00 in·lb/rad
RadialStiffness	8458.0000 in·lb
Elastomer Characteristic
ElastomerCharacteristic	Four types of spiders are available for the CJ Series of couplings Urethane spiders provide high abrasion resistance and elasticity, along with good damping characteristics The spiders are offered in a variety of shore hard nesses, each providing a different level of torque capacity, damping, and chemical resistance The 92A shore insert (yellow in color) is the standard, offering excellent torque carrying capacity The 80A shore insert (blue) offers the best damping characteristics The 95/98A shore spider (red) offers higher torque than the standard 92 shore, but retains greater damping capacity compared to the 64D shore insert (green) The 64D shore insert is offered for high humidity environments, higher temperatures, and offers the highest torque capacity The standard curved jaw spider design has a hole in the center to accommodate small between shaft end measurements The 80A, 92A, and 95/98A shore spiders have a temperature capacity of 212° F The 64D shore spider has a temperature capacity of 230° F The curved jaw spider’s urethane material also resists oil, dirt, sand, grease, moisture, many solvents, as well as atmospheric effects of ozone
Misalignment Information
MisalignmentInformation	The GS Series coupling handles the following types of misalignment: axial, angular, and radial. The coupling retains its zero backlash properties due to its spider design. Axial Misalignment Axial misalignment can be caused by different shaft tolerances or by thermal expansion of shafts. The GS Series coupling handles axial misalignment while keeping reactionary forces low. Radial Misalignment Radial misalignment can be defined as a measure of the offset distance between the centerlines of the driving and driven shafts. This type of misalignment, due to the forces involved, causes the highest stress. Angular Misalignment Angular misalignment can be defined as a measure of the angle between the centerlines of the driving and driven shafts, where those centerlines would intersect approximately halfway between shaft ends. The GS Series coupling can handle a specific amount of angular misalignment for each given size (refer to chart on right).
Typical Applications
TypicalApplications	Electric Measuring Systems and Control Systems
Features
Features	Simple 3 piece jaw design Aluminum and steel material hubs Clamping and locking device hubs available Four different types of urethane shores to choose from